Push until the door opens all the way.
Operate doors glass in emergency push open.
Early icu doors were on tracks and could easily breakaway at any point.
In an emergency they automatically close via the impulse from a smoke detector and secure the fire section or prevent the spread of smoke.
To do this first unlatch the door and then press the gauge against the door.
Step through the doorway onto the mat on the other side.
Turn the adjustment screw or knob varies by model 1 4 to 1 2 turn at a time until you ve achieved your desired closing speed.
Push the handle shut for a secure hold.
Door should remain fully open without interruption.
For this category of occupant doors need to be operated easily and obviously.
Refer to figure 4 2.
Step on the opening activating mat in several places.
Implementing fire door safety.
Different styles of doors are available which can either match the interior decor or stand out so they re easy to notice in an emergency.
The best way to measure door opening force is by using a door force gauge also called a door pressure gauge.
Automatic doors offer safety thanks to sophisticated systems and sensors even in an emergency.
Follow these steps to make sure your doors are accessible to all.
Turn it counter clockwise to increase speed and clockwise for a slower speed.
To function as an emergency breakaway door an icu door has to breakaway at any point full closed full open or anywhere in between.
Press the button and the handle snaps open.
If your door has two closers unhook one closer to adjust one closer at a time.
Doors which are used as fire protection doors must close safely in the event of a fire or if smoke develops.
If the door does not open close turn power off for 15 seconds then switch on.
Door caution activate switch or push to operate 1.
Secure door to its hanger by pushing door panels in from the outside.
Door should slide open smoothly and stop without impact.
Function switch is set to automatic aut.
If there is more than one mat on each side each mat.
Measure door opening force and closing speed.
And is intended to swing in the direction of egress.
In buildings used by the general public the usual hardware on final exits is a horizontal push pad or bar unless the door is completely free moving such as the front door once unlocked.
So it wasn t an issue to provide the emergency breakaway capability.